Welcome to Huizhou Tonsim Intelligent Technology Co., Ltd.

  • +86-0752-7773617
  • info@tonsimauto.com
  • 中文 | EN
LOCATION:HOME > PRODUCT > Car Cover

Car Cover

Model: TSACC0201

Most theft-make your car "invisible" nowhere to be found, and intelligent - remote automatic sewing.
1,the most convenient - a key easily portable ratractable want to use
2, the most environmentally friendly - energy conserviation to reduce the number of car wash
3,the most sunscreen - two minutes to bid fareweel to "oven" suffering
4, the most theft - make your car "invisible" now where to be found

5, the most intelligent - Remote automatic sewing


Aritificial intelligence
One-key operation
Double security
Portable protection device
Exclusive product patent

Material: double poliyester taffeta encryption and double siver(100% uv blocking)
Shell Material: ABS resin(high strenth.toughness good type thermoplastic polymer)
Floor Mat material: TPU (thermoplastic polyurethane elastomer)
Product Size: 465*465*153mm
Battery: 12v 3000mAh Li-on Polymer battery
Battery Life: recycle 600 times more
Working Temperature: -20 - -60
Function: Environmental protection, security, convient, smart
Accessories:Battery, Charger, Remote Controller, Prevention of burglary line, user manual.
1. Installation
①Open the buttery, press the button "", will give the voice prompt "release the car cover", car cover will release freely, go in the car cover adjusting status ((about 60 seconds). 
②Press the button "", will give voice prompt "Pausing", then stop to work. ③Buckle the carabiners to the 4 poles on the rotational plate. 
④Tighten up the rope and rope by means of a slipknot. 
⑤Press the button "" again, will give voice prompt "Unpause",host machine re-works, after 35 seconds begin to collect the car cover. 
⑥Press button "", will give the voice prompt "collect the car cover", wait for about 25 seconds, the proceeding finish.(If the car cover couldn't collect fully, please press button ""again within 5 seconds, till the car cover collect fully). 
⑦Finish the collecting process, will give the voice prompt "finish".
2. Disassembly
①Open the buttery, press the button "" , will give the voice prompt "release the car cover", car cover releases freely, go in the car cover adjusting status. (about 60 seconds)
②Press the button "", will give voice prompt "Pausing", then stop to work.
③Loosened the slipknot in the middle of the car cover.
④Take off the 4 carabiners from the rotational plate. 
⑤Take off the car cover from the host machine.
⑥Press the button "",will give the voice prompt " Unpause ",host machine re-works,after 60 seconds the top cover of the host machine will descend and go to anti-theft opening status, while will give the voice prompt “Anti-theft open”.